Sensitivity gain function1.Adjust the gain value by transmitter’s sensitivity channel, range from -100% ~ 0 ~ + 100%.a. 0 is no gain at all.b. -100%/+ 100% is the maximum sensitivity gain.2. When the gain wire is not used, use the gyroscope’s own potentiometer to adjust the gain value. Instruction of Function Switch 1. EPA (Travel […]
Sensitivity gain function1.Adjust the gain value by transmitter’s sensitivity channel, range from -100% ~ 0 ~ + 100%.a. 0 is no gain at all.b. -100%/+ 100% is the maximum sensitivity gain. 2. When the gain wire is not used, use the gyroscope’s own potentiometer to adjust the gain value. Instruction of Function Switch 1. EPA […]
Sensitivity gain function1.Adjust the gain value by transmitter’s sensitivity channel, range from -100% ~ 0 ~ + 100%.a. 0 is no gain at all. b. -100%/+ 100% is the maximum sensitivity gain. 2. When the gain wire is not used, use the gyroscope’s own potentiometer to adjust the gain value. Instruction of Function Switch 1. […]
Rotor Poles：2 Max Voltage:<8.4V Watts：80W Max RPM：60000 Motor Size：φ15×25mm Shaft：φ2mm Length of extend shaft :10 Weight:17g
Max Amps:8A Max Voltage (V):<8.4 Resistance(Ω):0.74 No-load Current(A):0.25 Continuous Power(W):80 Poles:2 Max RPM:60000 Length of extend Shaft:10mm Diameter Length(mm):Φ15X25mm Shaft Diameter(mm):Φ2 Weight:17g
Max Amps:8A Max Voltage (V):<8.4 Resistance(Ω):0.74 No-load Current(A):0.25 Continuous Power(W):80 Poles:2 Max RPM:60000 Length of extend Shaft:10mm Diameter Length(mm):Φ15X25mm Shaft Diameter(mm):Φ2 Weight:17g
Max Amps:10A Max Voltage (V):<8.4 Resistance(Ω):0.28 No-load Current(A):0.5 Continuous Power(W):80 Poles:2 Max RPM:60000 Length of extend Shaft:10mm Diameter Length(mm):Φ15X25mm Shaft Diameter(mm):Φ2 Weight:17g
Max Amps:10A Max Voltage (V):<8.4 Resistance(Ω):0.28 No-load Current(A):0.5 Continuous Power(W):80 Poles:2 Max RPM:60000 Length of extend Shaft:10mm Diameter Length(mm):Φ15X25mm Shaft Diameter(mm):Φ2 Weight:17g
Size: 15.0*10.0*3.5mm; Weight: 0.72g; Working voltage: 3.0V or 3.3V; Compatible with SANWA FHS5 protocol; Support EVO and 4CH PWM two working modes; The output speed is 2.6ms in EVO mode; The output speed is 5.4ms in 4CH PWM mode;
