Rotor Poles：2 Max Voltage:<8.4V Watts：80W Max RPM：60000 Motor Size：φ15×25mm Shaft：φ2mm Length of extend shaft :10 Weight:17g
Max Amps:8A Max Voltage (V):<8.4 Resistance(Ω):0.74 No-load Current(A):0.25 Continuous Power(W):80 Poles:2 Max RPM:60000 Length of extend Shaft:10mm Diameter Length(mm):Φ15X25mm Shaft Diameter(mm):Φ2 Weight:17g
Max Amps:8A Max Voltage (V):<8.4 Resistance(Ω):0.74 No-load Current(A):0.25 Continuous Power(W):80 Poles:2 Max RPM:60000 Length of extend Shaft:10mm Diameter Length(mm):Φ15X25mm Shaft Diameter(mm):Φ2 Weight:17g
Max Amps:10A Max Voltage (V):<8.4 Resistance(Ω):0.28 No-load Current(A):0.5 Continuous Power(W):80 Poles:2 Max RPM:60000 Length of extend Shaft:10mm Diameter Length(mm):Φ15X25mm Shaft Diameter(mm):Φ2 Weight:17g
Max Amps:10A Max Voltage (V):<8.4 Resistance(Ω):0.28 No-load Current(A):0.5 Continuous Power(W):80 Poles:2 Max RPM:60000 Length of extend Shaft:10mm Diameter Length(mm):Φ15X25mm Shaft Diameter(mm):Φ2 Weight:17g
Size: 15.0*10.0*3.5mm; Weight: 0.72g; Working voltage: 3.0V or 3.3V; Compatible with SANWA FHS5 protocol; Support EVO and 4CH PWM two working modes; The output speed is 2.6ms in EVO mode; The output speed is 5.4ms in 4CH PWM mode;
In the following link there is the manual: Manual EVO-RX-SANWA Product Type: MX EVO RX-SANWA Protocol: SANWA-FH3/FH4 Size: 10.0*15.0*3.5mm Work Volt: 3.0V/3.3V Reaction Time: EVO->2.6ms – 4CH PWM->5.6ms Support KYOSHO EVO Mode (MR-03EVO/MA-03EVO): Yes Support 4CH PWM OUTPUT Mode: Yes Support 1/72-1/64 RC Car Mode: Yes Support 1/43-1/24 RC Car Mode: Yes FW UPDATE: No […]
Size: 13.5*10.0*3.5mm; Weight: 0.58g; Working voltage: 3.0V or 3.3V; Compatible with Futaba-SFHSS protocol; Support EVO and 4CH PWM two working modes; The output speed in EVO mode is 3.4ms; In 4CH PWM mode, the output speed is 3.4/6.8ms; Support online firmware upgrade.
Size: 15.0*10.0*3.5mm; Weight: 0.72g; Working voltage: 3.0V or 3.3V; Compatible with SANWA FH3/FH4 protocol; Support EVO and 4CH PWM two working modes; The output speed is 2.6ms in EVO mode; The output speed is 5.4ms in 4CH PWM mode;
This RC receiver unit is FUTABA-SFHSS full range of remote controls compatible. It offers full 4-channel support in ultra-light weight and micro size. It is designed for micro racing cars.
Sanwa fh5 ontvanger Met ingebouwde transponder
