Sensitivity gain function1.Adjust the gain value by transmitter’s sensitivity channel, range from -100% ~ 0 ~ + 100%.a. 0 is no gain at all.b. -100%/+ 100% is the maximum sensitivity gain.2. When the gain wire is not used, use the gyroscope’s own potentiometer to adjust the gain value. Instruction of Function Switch 1. EPA (Travel […]
Sensitivity gain function1.Adjust the gain value by transmitter’s sensitivity channel, range from -100% ~ 0 ~ + 100%.a. 0 is no gain at all.b. -100%/+ 100% is the maximum sensitivity gain. 2. When the gain wire is not used, use the gyroscope’s own potentiometer to adjust the gain value. Instruction of Function Switch 1. EPA […]
Sensitivity gain function1.Adjust the gain value by transmitter’s sensitivity channel, range from -100% ~ 0 ~ + 100%.a. 0 is no gain at all. b. -100%/+ 100% is the maximum sensitivity gain. 2. When the gain wire is not used, use the gyroscope’s own potentiometer to adjust the gain value. Instruction of Function Switch 1. […]
Rotor Poles：2 Max Voltage:<8.4V Watts：80W Max RPM：60000 Motor Size：φ15×25mm Shaft：φ2mm Length of extend shaft :10 Weight:17g
Max Amps:8A Max Voltage (V):<8.4 Resistance(Ω):0.74 No-load Current(A):0.25 Continuous Power(W):80 Poles:2 Max RPM:60000 Length of extend Shaft:10mm Diameter Length(mm):Φ15X25mm Shaft Diameter(mm):Φ2 Weight:17g
Max Amps:8A Max Voltage (V):<8.4 Resistance(Ω):0.74 No-load Current(A):0.25 Continuous Power(W):80 Poles:2 Max RPM:60000 Length of extend Shaft:10mm Diameter Length(mm):Φ15X25mm Shaft Diameter(mm):Φ2 Weight:17g
Max Amps:10A Max Voltage (V):<8.4 Resistance(Ω):0.28 No-load Current(A):0.5 Continuous Power(W):80 Poles:2 Max RPM:60000 Length of extend Shaft:10mm Diameter Length(mm):Φ15X25mm Shaft Diameter(mm):Φ2 Weight:17g
Max Amps:10A Max Voltage (V):<8.4 Resistance(Ω):0.28 No-load Current(A):0.5 Continuous Power(W):80 Poles:2 Max RPM:60000 Length of extend Shaft:10mm Diameter Length(mm):Φ15X25mm Shaft Diameter(mm):Φ2 Weight:17g
Noble ontvanger Met ingebouwde transponder
This RC receiver unit is NOBLE full range of remote controls compatible. It offers full 4-channel support in ultra-light weight and micro size. It is designed for micro racing cars.
In the following link there is the manual: Manual EVO-RX-SANWA Product Type: MX EVO RX-SANWA Protocol: SANWA-FH3/FH4 Size: 10.0*15.0*3.5mm Work Volt: 3.0V/3.3V Reaction Time: EVO->2.6ms – 4CH PWM->5.6ms Support KYOSHO EVO Mode (MR-03EVO/MA-03EVO): Yes Support 4CH PWM OUTPUT Mode: Yes Support 1/72-1/64 RC Car Mode: Yes Support 1/43-1/24 RC Car Mode: Yes FW UPDATE: No […]
The 2.4GHz 4-Channel FHSS5 SSL Telemetry Receiver uses a 30mm cable antenna with exceptional range and response time. With a lightweight design and a small footprint, this receiver is great for Mini-z scale electric RC cars. Features: 1. Sanwa 2.4GHz FHSS5U/FHSS5 Spread Spectrum System compatible 2. Compatible with SSL (SUPER VORTEX Series, etc…) 3. Ultra […]
This RC receiver unit is Sanwa FHSS-4 and FHSS-3 compatible. It offers full 4-channel support in ultra- light weight and micro size. It is ideal for micro racing cars. Voltage: 3.3V～8.4V Channels: 4CH Weight: 2g Dimension: 19×13mm PWM Mode: Normal/ SHR/ SSR Compatibility Compatible with FH4T no FH3 remote control system. Suitable for remote control […]
This is Hobbywing 3-in-1 Professional Multifuction LCD Program Box V2 For RC Programmable ESC. This 3 in 1 programming card is intended for configuring hobbywing Xerun, Ezrun and Platinum drives but can also be used to test your Lipo batteries . Its user- friendly LCD interface makes programming quick and easy . With your PC, […]
Feature: For :1/28 RC mini car Color: Black Specification: Continuous & Peak Current:30A/80A Maximum Cell Count:2S LiPo BEC Output:6V/7.4V @ 3.5 amps Size:22.7 x 14.2 x 11.8mm Weight:5 grams (without wires) Works with 1626 sized motors (not included) Programming – LCD G2 Program Box, […]
