Custom made spring kit to adjust the different characteristics of the RTA chassis. For body and chassis of model car 1/28 radio controlled.

This shims kit allows you to very quickly adjust the front ride height of the RTA without changing the springs compression or wheels angles.   This kit is composed of 3 shims of different thicknesses:   1 point shim: 0.6mm 2 points shim: 1mm 3 points shim: 1.5mm Delivered with M2 * 6 screws

These knuckles add 3 ° of camber to the RTA. Originally, the chassis already has 2 ° of camber, these knuckles will allow you to have a total camber equal to -5 °. New version of the RTA knuckles with many advantages: The shape of the knuckle allows for better suspension movement. The balls are […]

These knuckles add 2 ° of camber to the RTA. Originally, the chassis already has 2 ° of camber, these knuckles will allow you to have a total camber equal to -4 °. New version of the RTA knuckles with many advantages: The shape of the knuckle allows for better suspension movement. The balls are […]

These knuckles add 1 ° of camber to the RTA. Originally, the chassis already has 2 ° of camber, these knuckles will allow you to have a total camber equal to -3 °. New version of the RTA knuckles with many advantages: The shape of the knuckle allows for better suspension movement. The balls are […]

These side carbon plates are 4mm longer than the original ones in order to have a 102mm wheelbase and to be able to use LM type bodies.   There are also harder than the original ones to increase the vivacity and limit roll of the RTA.   Use with 102mm friction plate => RT048   […]

Side carbon plates harder than the original ones to increase the vivacity and limit roll of the RTA.   Hardness: Hard   For 1 / 28th radio-controlled model chassis.

These side carbon plates are 4mm longer than the original ones in order to have a 102mm wheelbase and to be able to use LM type bodies.   There are softer to increase rear traction.   Use with 102mm friction plate => RT048   Hardness: Soft   For body and chassis of model car 1/28 […]

Side carbon plates softer than the original ones to increase the rear traction.   Hardness: Soft   For 1 / 28th radio-controlled model chassis.

These side carbon plates are 4mm longer than the original ones in order to have a 102mm wheelbase and to be able to use LM type bodies.   Use with 102mm friction plate => RT048   Hardness: Medium   For body and chassis of model car 1/28 radio controlled.

This brass plate will allow you to add 10gr on the rear and lower the center of gravity of the RTA. Very useful for improving traction and consistency of the rear.   For body and chassis of model car 1/28 radio controlled.

Set of 6 M2 countersunk head screws, length 5mm for the RTA V1.2.   Torx T6 head.

Set of 11* M2 round head screws, length 4mm for the RTA V1.2.   Torx T6 head.

Set of 3* M2 round head screws, length 6mm for the RTA V1.2.   Torx T6 head.

Set of 2*M2 grub screws, length 4mm for the front end (RT003 V1.2) Hexagonal 0.9mm head.

Set of 11* M2 countersunk screws, length 4mm for the RTA V1.2.   Torx T6 head.

Optimized version V1.2 of Diff holders for RTA chassis. Reduced manufacturing tolerances and better tightening of the ball bearing. These parts are machining in good quality anodized aluminium 7075-T6. For body and chassis of model car 1/28 radio controlled.

Carbon plate diff holders for RTA chassis. Reduced manufacturing tolerances and better quality carbon fiber. For body and chassis of model car 1/28 radio controlled.

Aluminium plate motor mount for RTA chassis. Reduced manufacturing tolerances and reworked aesthetics. This part is machining in good quality anodized aluminium 7075-T6. For body and chassis of model car 1/28 radio controlled.

  Optimized version of the RTA engine mount: Allows quick and stable gap adjustment between spur and pinion without having to disassemble any part. Better surface quality from machining and anodizing.  

Optimized version V1.2 of friction discs for RTA chassis. Its improvement consists of a more constant glide and a bigger reserve of grease. These parts are machining in POM. This material gives the discs incomparable sliding power. For body and chassis of model car 1/28 radio controlled.

Optimized version V1.2 of friction plate for RTA chassis. This part is machining in carbon. For 98mm RTA chassis. For body and chassis of model car 1/28 radio controlled.

These parts made of 7075-T6 aluminum black anodized  keep the battery in position on the RTA. The system allows you to change the Lipo quickly by simply turning one of the arms. This system is mounted on the RT088 center pivot part. The RT015 V1.2 + RT088 assembly fits perfectly on RTA V1 and RTA […]

Optimized version V1.2 of steering turnbuckles set for RTA chassis. RT010 V1.2 + RT011 V1.2 fits perfectly on RTA V1 and RTA V1.2. These parts are machining in good quality stainless steel. For body and chassis of model car 1/28 radio controlled.